Furuno SC-60 manual Others Menu, Others menu

3. OPERATION

3.11OTHERS Menu

The OTHERS menu chooses whether to output last-used heading data, and smooths rate of turn meter reading (rate-of-turn meter required).

1.Press the [MENU] key to display the main menu.

MAIN MENU

ALARMS

MESSAGES GPS SETUP SYS SETUP SOFT VER.

OTHERS

SATELLITE DGPS

I/O SETUP INST MENU ERASE TRIP MENU

Main menu

3. Choose OTHERS and press the [ENT] key.

OTHERS

HOLD HDG DATA: OFF

SMOOTH ROT : 2.5SEC

ROT RANGE : 60￿/min

Others menu

4.Choose HOLD HDG DATA and press the [ENT] key.

5.Choose ON to use, at power on, last-used heading until current heading is calculated. Last-used heading flashes to inform that it is unreliable.

6.Press the [ENT] key.

7.Choose SMOOTH ROT and press the [ENT] key.

8.Use the Omnipad to enter smoothing time. Choose location with ◄ or ►; change value with ▲ or ▼.

9.Press the [ENT] key.

10.Choose ROT RANGE and press the [ENT] key.

11.Choose the range of the ROT graph: 30, 60 or 90 and press the [ENT] key.

12.Press the [DISP] key to close the menu.

3-18