Furuno SC-60 manual Geodetic data, System Setup menu

3. OPERATION

3.9System Setup

3.9.1Geodetic data

Your unit is preprogrammed to recognize most of the major chart systems of the world. Although the WGS-84 system (default setting) is the GPS standard, other categories of charts in other datum still exist. Match the GPS datum with the chart system.

1.Press the [MENU] key to open the menu.

2.Choose SYS SETUP and press the [ENT] key.

SYSTEM SETUP

DATUM	:	WGS84
UNITS	: kt
TIME DIFF	: +00:00
TIME DISP	: 24 HOUR
TEST?
DEMO	: OFF

EXCHANGE BATTERY?

SYSTEM SETUP menu

3.Confirm that the cursor is selecting DATUM and press the [ENT] key.

4.Choose WGS84 (GPS standard), WGS72 or OTHER according to the nautical chart you use and press the [ENT] key.

5.If you chose WGS72 or WGS84, press the [DISP] key to finish. For OTHER, go to step 6.

6 Press the [ENT] key.

7.Use the Omnipad to enter chart number, referring to the geodetic chart list on page A-2. Choose location with ◄ or ►; change value with ▲ or ▼.

8.Press the [ENT] key.

9.Press the [DISP] key to close the menu.

3-11