Furuno SC-60 Installing the Antenna Units, Mounting dimensions for antenna, orienting the antenna

2. INSTALLATION

2.2Installing the Antenna Units

2.2.1SC-series antenna unit

NOTICE

Fasten the antenna to the mounting location lastly if it is more convenient to connect the antenna cable before mounting the antenna unit.

1.Prepare a mounting platform (wood, steel or aluminum) in accordance with the illustration shown below. If corrosive material is used, take necessary anti-corrosion measures.

Note: When drilling holes in the platform, be sure they are parallel with the fore-and-aft line.

2.Fasten the antenna unit to the platform with four sets of M10 hex. bolts, spring washers and flat washers, orienting it as shown below. (The bow mark

( ) on the antenna should face the bow.) The torque for the hex. bolts should be between 19.6-24.5 Nm.

NOTICE

Do not open the antenna.

This installation does not require removal of the antenna cover.

240

160

240

160

N

U

R

F U

BOW

Fixing Hole (f11 mm)

Flat Washer

Spring Washer Hex. Bolt

Mounting dimensions for antenna, orienting the antenna

2-4