Gaggenau EB 290/291, EB 270/271 You can query the entered value by pressing the Timer key twice

2x

Fig. 30

Note: the time of day that is set on the appliance is the starting point for programming the switch-off time.

You can query the entered value by pressing the (Timer) key twice.

Programming a switch-off time

The appliance switches off automatically at a time that you have chosen. The starting point is the time of day set on the appliance.

Proceed as follows:

–Press the (Timer) key twice. The (End) and (Cooking time) symbols flash.

–Press the + or – key to set the required time. You can choose any switch-off time within a period of 24 hours.

–Press the (Confirmation) key to confirm the entered value. An audible signal is sounded. The (Cooking time) symbol lights up on the display.

After the set time has elapsed, the (Cooking time) symbol flashes and an audible signal is sounded.

By pressing any key, you can switch off the signal and heating will start again. Turn the temperature selector switch to 0 to end the operation.

Programming a cooking time and an off time

This mode enables you to start and end baking and cooking in your absence.

Proceed as follows:

–Enter a required duration (see Page 16)

–Press the (Confirmation) key

–Enter the required switch-off time (see above)

–Press the (Confirmation) key

The automatic mode becomes active as soon as the switch-off time is programmed and you have pressed the (Confirmation) key.

17