Garmin Columbia 350/400 - page 20

Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
1-8
SECTION 1
SYSTEM OVERVIEW
OBS – Select to select OBS mode on the CDI when
navigating by GPS (only available with active leg).
CDI – Select to change navigation mode on the CDI
between GPS, VOR1, and VOR2.
XPDR – Select to display the transponder mode
selection softkeys.
STBY – Select to select standby mode.
ON – Select to select mode A.
ALT – Select to select altitude reporting mode.
VFR – Select to automatically squawk 1200 (only
in the U.S.A., refer to ICAO standards for VFR
codes in other countries).
CODE – Select to display transponder code selection
softkeys 0-7.
0 through 7 – Select numbers to enter code.
IDENT – Select to provide special aircraft
position identification to Air Traffic Control
(ATC).
Press the BACK Softkey
to return to the top level
softkeys.
Press the BACK
Softkey
to return to
the top level
softkeys.
Figure 1-6 PFD Softkey Flow Chart – 3
BKSP – Select to remove numbers entered one
at a time.
BACK – Select to return to the previous level
softkeys.
IDENT – Select to provide special aircraft position
identification to Air Traffic Control (ATC).
BACK – Select to return to the previous level
softkeys.
ALERTS – Select to display the Alerts Window.
IDENT – Select to provide special a ircraft position
identification to Air Traffic Control (ATC).
TMR/REF – Select to display the Timer/References
Window.
NRST – Select to display the Nearest Airports
Window.
ALERTS – Select to display the Alerts Window.