Garmin G1000 Cockpit Reference Guide for the Columbia 350/400
2-8
SECTION 2
FLIGHT INSTRUMENTS
Distance to
Bearing Source
Waypoint
Identifier
Pointer
Icon
Bearing
Source
Figure 2-19 BRG2 Information Window
Navigation Source
Change navigation sources:
1) Select the CDI Softkey to change from GPS to
VOR1/LOC1.
2) Select the CDI Softkey again to change from
VOR1/LOC1 to VOR2/LOC2.
3) Select the
CDI
Softkey a third time to return to
GPS.
When using GPS as the navigation source, the following
may appear:
• INTEG – GPS information is either not present or
is invalid for navigation use
• WARN – GPS detects a position error
• SUSP – Displayed when in OBS Mode indicating
GPS waypoint sequencing is suspended.
Figure 2-19 GPS INTEG, GPS SUSP, LOC1 and VOR2
Enable/disable OBS mode while navigating
with GPS:
1) Select the OBS Softkey to select OBS Mode.
2) Turn the CRS Knob to select the desired course
TO/FROM the waypoint.
3) Select the OBS Softkey again to return to
normal operation.
NOTE: The OBS Softkey is only displayed when
navigating an active leg using GPS.
.