DX40 Serial Device Router Installation Guide
1
Chapter 1

Overview

1.1 Overview

The Magnum DX40 provides connectivity to asynchronous and Ethernet traffic through
two programmable serial ports and two Ethernet ports for Fiber optic and (optionally)
copper line connections.

1.2 Configuration

The following sections describe the features and requirements of the DX40.
1.2.1 Connectivity
Depending on the DX40 Model ordered, the DX40 is equipped with:
These ports are all located on the bottom of the device, along with the MAC address, as
illustrated in Figure 1-1.
Figure 1-1. Bottom View
• 2 Ethernet ports,
either 2 100FX multi/single mode SFP
or One 100FX multi/single mode SFP and one 10/100 BaseT,
RJ45
• 2 serial programmable RS232/485 ports
This DX40 is configured with one
100FX multi/single mode port and
one 10/100 BaseT RJ45 port.
Serial ports
MAC Address