2
6KQF-2SSCL, 2 @100 Mb SSC Fiber Port
Magnum 6KQ Managed Field Switch Installation and User Guide | (04/07) |
the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full-duplex and half- duplex.
Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and an FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off).
5.2.2.6KQF-2MSC, 2@100Mb multi-mode FX-SC “snap-in” Fiber connector
The Magnum 6KQF-2MSC is two port module equipped with 2 multi-mode
100Mbps fiber optic transceivers. This is similar to the 6KQF-2MST. It has the same LEDs indicating port activity (ACT), Link (LK), and FDX / HDX and 10/100 operation, as well as the same face-plate lettering. The difference is that the 6KQF-2MSC is equipped with SC-type "snap-in" fiber port connector instead of an ST-type.
5.2.36KQF-2SSCL, 2 Ports @100Mbps single-mode FX-SC-type, Sgl.M
The Magnum 6KQF-2SSCL is also a Fiber module equipped with 2 Single-mode (Long Reach) SC-type connectors. It provides a long reach Fiber function in one module to the 6KQ Switches, supporting 100Mb single-mode (Long-Reach) fiber network segments.
The 6KQF-2SSCL, when installed in a Magnum 6KQ Switch, supports single- mode fiber cable lengths of as much
as 40+ Km (see Power Budget, Section 4.5). Each port has an
| 3 | ACT | ACT |
| Activity (ACT) LED indicating |
| | F/H |
| packets being received, a Link (LK) | 1 | LK RX | TX | LK RX |
| | | |
| | | | |
| LED indicating proper connectivity | 1 | LINK | 2 | Activity |
| with the remote device when lit, and |
| 3 | | | |
| a FDX/HDX LED indicating full- | F/H | | |
| | | | |
duplex mode when lit (or half-duplex when off).
www . GarrettCom . com
37
