GarrettCom Magnum 6KQ manual FX-SC-type, snap-in

Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)

5.2.46KQ3-RJMSC “COMBO” 2@ 10/100Mbps RJ-45 Ports and

1@100Mbps Multi-mode		6KPQ3-RJMSC
FX-SC-type, “snap-in”
	2 Port@ 10/100Mbps & 1 port @ 100Mbps
connector
The Magnum 6KPQ-RJMSC		2	MultiMode Fiber port
				1
is also a Combo module	10/100	LK/ACT		100Mb
equipped with 2 dual speed				ACT
				F/H
copper ports and 1 Multi-mode	F/H		ACT TX	LK RX
	4
SC-type connector. It provides			3
an advantage through	1	LINK	2	10/100
combining copper and Fiber
			4
functions in one module that	3 ACTIVITY			FULL/HALF

supports two copper and one multi-mode fiber network segments.

The 6KQ3-RJMSC, when installed in a Magnum 6KQ-Field Switch, operates on copper at 100m distances. The Fiber is multi-mode and cable lengths can be as much as 2 Km (see Power Budget, Section 4.5)

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and a FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates 100Mbps speed when lit and at 10Mbps speed when off.

5.2.56KQ4-MT, 4 @100Mb multi-mode FX , MTRJ Small-Form-factor

Magnum 6KQ4-MT is a multi-mode fiber optic 4-port module equipped with a

small-form-factor MTRJ-type connector. It looks almost like an RJ-45 port, but it is black in color. The MT-RJ’s small compact size connector and ease of connection make

it a good choice for			6KQ4-MT, 4 @100 Mb MTRJ Fiber Port				2
100Mbps “fiber-to-the-
desktop” Ethernet	3		ACT	1	2	3
connectivity. When			F/H				HACT
			ACT
			F/		LK	LK	F/
		1
installed in a Magnum			H	LK			H
6KQ Switch, it supports			1	LINK	2	Activity
fiber optic cable			3	F/H

distances up the IEEE-

standard 100Mbps distance limits, i.e., typically 2km at full-duplex or half-duplex.

www . GarrettCom . com

38