GarrettCom Magnum 6KQ manual F10ST, Mlc

Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)

Worst case distance = {Worst case OPB, in dB} / [Cable Loss, in dB/Km] where the “Cable Loss” for 62.5/125 and 50/125∝m (M.m) is 2.8 dB/km, and the “Cable Loss” for 100/140 (Multi-mode) is 3.3 dB/km,

and the “Cable Loss” for 9/125 (Single-mode) is 0.5 dB/km

and the “Cable Loss” for 9/125 (Single-mode) is 0.4 dB/km (LXSC25) and the “Cable Loss” for 9/125 (Single-mode) is 0.25 dB/km

(LXSC40)

and the “Cable Loss” for 9/125 (Single-mode) is 0.2 dB/km (LXSC70)

The following data has been collected from component manufacturer’s (Agilent’s and Lucent’s) web sites and catalogs to provide guidance to network designers and installers.

Fiber

Port

Module

6KP4V-

F10ST

6KPV-

MST, MSC

6KPV-SSC

6KPV-

SSCL

6KPV-

MTRJ

6KPV-

MLC

6KPV-SLC

Magnum

SFP-LX10

Magnum

SFP-LX25

Magnum

SFP-LX40

Magnum

SFP-LX70

Speed,		Std.	Wave	Cable	X’mitr	R’cvr	Worst	Worst*	typical	typical*
Std.	Mode	km	-	Size	Output	Sens.	OPB,	distance	OPB,	distance
		fdx	length	∝m	PT , dB	PR ,dB	dB	Km, fdx	dB	Km, fdx
		(hdx)	nm
10Mb	Multi-	2	850	62.5/125	-15.0	-31	14	5	17	6
FL	Mode	(2)		100/140	-9.5	-31	19.5	5.9	23.5	7
				50/125	-19.5	-31	19.5	3.4	13.5	4.8
100Mb	Multi-	2	1300	62.5/125	-20	-31	9.0	3.0	14	5
FX	mode	(0.4)		50/125	-23.5	-31	5.5	2.0	12	4
100Mb	Single-	18+	1300	9/125	-15	-31	14	28	17.5	35
FX	mode	(0.4)
100Mb	Single-	40	1300	9/125	-5	-34	29	58	32.5	65
FX	mode	(0.4)
100Mb	Multi-	2	1300	62.5/125	-20	-31	9.0	3.0	15.8	5.5
FX	mode	(0.4)		50/125	-23.5	-31	5.5	2.0	12.2	4.0
100Mb	Multi-	2	1300	62.5/125	-19	-31	12	4	16	5.7
FX	mode	(0.4)
100Mb	Single-	15+	1310	9/125	-15	-28	11	22	-	-
FX	Mode	(0.4)
1000 Mb	Single-	10	1310	9/125	-10.0	-22	10	22	11	24
FX
(Gigabit)
1000 Mb	Single-	25	1310	9/125	-3.0	-21	16	40	18	45
FX
(Gigabit)
1000 Mb	Single-	40	1550	9/125	-5.0	-22	15	60	17	68
FX
(Gigabit)
1000 Mb	Single-	70	1550	9/125	-2.0	-22	18	90	20	100
FX
(Gigabit)

*Note: The use of either multi-mode or single-mode fiber to operate at 100Mbps speed over long distances (i.e., in excess of approx. 400 meters) can be achieved only if the following factors are both applied:

www . GarrettCom . com

34