GarrettCom Magnum 6KQ manual 6KQ Port Module 6KPM Installation, Male Connector

Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)

The Alarm Contacts are on the front left area (next to the DC power source) of the Magnum 6KQ unit and are green in color as shown in the picture.

3.66KQ Port Module (6KPM) Installation

Magnum 6KQ Switches are normally received from the factory with all

required 6K Port Modules installed.

NOTE: There may be situations where the 6K PMs need to be added or replaced. Any change in configuration of the modules can be done only via factory installation. There is no field upgrade option for 6KQ port modules. Please contact Tech Support (support@garrettcom.com) / RMA(rma@garrettcom.com) for changing modules.

The 6KQ port modules are not compatible with or inter-changeable with the other Magnum 6K-Family Switches’ PMs, which use larger (typically 8-port) modules.

3.7Connecting a Management Console Terminal to Magnum 6KQ (Serial-RJ45 Console Port)

The serial console port on the Magnum 6KQ is different from other 6K-family switches. The Serial RJ- 45 port, as shown in the picture, requires an 8-pin RJ- 45 male connector to have the proper communication. (Note - the serial RJ-45 console port on the Magnum 6KQ is compatible with Cisco-type RJ-45 console port cables).

The Serial port pin-out for the RJ-45 console port used on Magnum 6KQ

8 1

8 pin RJ45 female connector at the Magnum 6KQ front panel

Female

connector

Pin	Name	Description	Dir
1	RTS	Request To Send	OUT
3	TXD	Transceiver Data	OUT
4	GND	Ground	-
5	GND	Ground	-
6	RXD	Receive Data	IN
8	CTS	Clear To Send	IN

Pin-out info for 6KQ (RJ-45 female connector).

8 1

Front

8 pin RJ45 male connector at the cables

Male

connector

www . GarrettCom . com

29