GarrettCom Magnum 6KQ manual Fiber Multi-mode connector types supported, Operating Environment

Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)

1000BASE-SX, full-duplex, multi-mode(50∝m cable) - 550m 1000BASE-LX, full-duplex, single-mode(62.5∝m cable) -5Km

Fiber Multi-mode connector types supported:

Fiber Port, ST-type (twist-lock):Fiber multi-mode, 10Mb 10BASE-FL Fiber Port, MTRJ-type (plug-in):SFF Fiber multi-mode100BASE-FX Fiber Port, SC-type (snap-in):Fiber optic multi-mode, 100BASE-FX Fiber Port, ST-type (twist-lock): Fiber optic m.-mode, 100BASE-FX

Fiber Port, 1000BASE-FX, SFP modules

Fiber Single-mode connector types:

Fiber Port, SC-type: Fiber optic single-mode, 100BASE-FX Fiber Port, LC-type Fiber SFF single-mode, 100BASE-FX Fiber Port, 1000BASE-FX, SFP modules

LEDs: Per Port (one set at the port, one set on swivel top on right side) LK: Steady ON when media link is operational

ACT: ON with receiver port activity

FDX/HDX: ON = Full-Duplex Mode OFF = Half-Duplex Mode

100/10: ON = 100Mbps speed OFF = 10 Mbps

Operating Environment

Ambient Temperature:

-40° to 140° F (-40° to 60°C) for UL60950 and Component Parts rating -60° to 195° F (-50° to 85°C) for IEC 60068 Type Test short term rating

Storage Temperature: -60°to 210°F (-50°to 100°C)

Ambient Relative Humidity: 5% to 95% (non-condensing)

Altitude: -200 to 13,000 ft. (-60 to 4000m)

Conformal Coating (humidity protection) option: Request quote

Alarm Relay Contacts

One NC indicating internal power, one NC software controllable

Packaging

Enclosure: High strength extruded aluminum

Dimensions: 6.85 in. H x 7.5 in. W x 2.0 in. D 17.4 cm H x 19.1 cm W x 5.08 cm D

Cooling method: Convection, fully-enclosed ribbed-surface aluminum case used as a sink, designed for vertical mounting, no fans

Weight: 3 lbs. (1.3 kg)

Management Console connector

Serial RJ-45, see details at sec. 3.7

DC Power Supply (Internal, floating ground design)

24VDC Power Input nominal (18 to 36VDC range) -48VDC Power Input nominal (36 to 60 VDC range) 125VDC Power Input nominal (88 to 150VDC range) Std. Terminal Block : “ -, GND, + ”

Power Consumption:

35 watts typical (for a fully loaded fiber model)

www . GarrettCom . com

2