GarrettCom Magnum 6KQ manual 1a 6KQ2-10ST, 2@10Mb multi-mode FX-ST twist lock Module

Magnum 6KQ Managed Field Switch Installation and User Guide (04/07)

Note: The 6KQ Port modules are not identical to the port modules used in other 6K products such as the 6K25e and 6K16V. For information about other 6K products, please see the applicable manual. For a list of 6KQ Port Modules, refer to Section 1.2

Each 6KQ Port Module (PM) is individually described in the following sections.

5.2.16KQF-2MST, 2@100Mb multi-mode FX-ST “twist lock” Combo

Module

The Magnum 6KQ-2MST is two port ST fiber module at 100MB. The module

is equipped with dual-mode ST-type connectors and dual speed copper ports. The ST- connector functions as a fiber optic transceiver to support 100BASE-FX network segments. When installed in a Magnum 6KQ Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable

distances up the IEEE-		6KQF-	2 @100 Mb ST Fiber
				2
standard 100Mbps distance
limits, i.e., typically 2km at	3	ACT		ACT
full-duplex and 412m at half-			TX LK RX	F/H
				TX	LK RX
		1
duplex.
Each port has an		1	LINK	2	Activity
Activity (ACT) LED		3	F/H

indicating packets being

received. A Link (LK) LED indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (half-duplex when off).

5.2.1a 6KQ2-10ST, 2@10Mb multi-mode FX-ST “twist lock” Module

The 6KP6-RJ10ST is a		6KQF-2MSC,	2 @100 Mb SC Fiber
two port Fiber module that looks					2
similar to the 100MbFiber module	3	ACT	ACT
with the exception of 10Mb speed
			F/H	TX	LK RX
at the ST fiber module. The ST-		1	LK RX
connector functions as a fiber optic		1		2	Activity
transceiver to support 10BASE-FX
		3
network segments. When installed			F/H

in a Magnum 6KQ Managed Switch, the fiber port supports fiber optic cable distances up

www . GarrettCom . com

36