GarrettCom Magnum 700X manual Rpm-Dte, RPM-FST Fiber ST, Twist-lock Connector, Magnum RPM-FST

Magnum RPM-DTE

1

2

1 Partition LED

2 Receive LED

Standard 15-pin male "AUI"

Magnum 700X Mini-Concentrators Installation and User Guide (05/98)

2.3.3RPM-DTE

The Magnum RPM-DTE is a module equipped with a 15-pin male DTE connector with lock posts. (The RPM-DTE is a mating connector for the RPM-AUI which has a 15-pin female connector and slide locks. The pin

assignments of the two are the same). The RPM-DTE card is designed to support direct

connections (no transceiver required) using

AUI drop cables to any device that is equipped with an AUI port. Examples of

such devices include servers, routers, bridges, hubs, and UNIX workstations.

2.3.4	RPM-FST (Fiber ST, Twist-lock Connector)
	The Magnum RPM-FST is a multi-mode fiber optic module equipped with a dual ST-

type connector. It functions as an IEEE 802.3 full repeater to support 10BASE-FL and FOIRL network segments. When used for 10BASE-FL segments, this module supports fiber optic

transmission distances up to 2000m. For	10BASE-FL, FOIRL
FOIRL applications, it supports fiber	ST Connectors
segments of up to 1000m in length. The
RPM-FST includes full transceiver
functionality and does not require an external	1
	2
transceiver device. In addition to Partition
(PART) and Receive (RX) LEDs, a LINK	3
LED indicates proper connectivity with the	1 LINK 2 Partition 3 Receive
remote device.	Magnum RPM-FST

NOTE: The RPM-FST circuit board contains a six pin jumper which controls the intensity of the transmitted signal. By default, the jumper is placed across pins 5 & 6. The jumper may be set as follows, to accommodate distances of up to 4 km:

(continued on next page)

GARRETT

10