
5Insert the bottom edge of the expansion card (the keyed edge with the contacts) into the slot on the system board and push in firmly to seat the card.
Screw
6After seating the card firmly, use the screw you removed to secure the card to the rear of the chassis.
7Connect cables to the card, if required.
8Close the case by following the instructions on page 20.
9Reconnect peripherals, the modem cord, and the power cord, then turn on the system.
You may need to reconfigure your system after installing some expansion cards. You may also need to install software that came with the card. Check the card documentation for additional information.
46Replacing and Adding System Components