
Replacing Convertible Notebook Components
Adding or replacing memory modules
Important
Use only memory modules designed for this Gateway convertible notebook.
Tools you need to complete this task:
Phillips #0 screwdriver
Memory bay
To add or replace memory modules:
1Complete the steps in “Preparing the convertible notebook” on page 5.
2Loosen the two memory bay cover screws that secure the memory cover. (These screws cannot be removed.)
Screw
Screw
3Remove the memory bay cover. Be careful not to break off the tabs located on the bottom of the cover. If the cover does not remove easily, wiggle the cover to loosen it.
6