Replacing Convertible Notebook Components
5Remove the hard drive by following the steps in “Replacing the hard drive” on page 17.
6Remove the hinge cover by following the steps in “Replacing the hinge cover” on page 23.
7Remove the palm rest by following the steps in “Replacing the palm rest” on page 25.
8Remove the system board by following the steps in “Replacing the system board” on page 35.
9Remove any tape holding the antenna wires and LCD cable, then gently pull the antenna wires out of the wireless bay.
10Remove the LCD grounding screw.
Screw
11Close the LCD panel, then remove the two rear LCD hinge screws.
Screw | Screw |
52