Replacing Convertible Notebook Components

Replacing the CMOS battery

Important

Use only CMOS batteries designed for this Gateway convertible notebook.

Tools you need to complete this task:

v

Flat-blade driver

- OR -

Scribe or non-marring tool

Phillips #0 screwdriver

Memory bay

To replace the CMOS battery:

1Complete the steps in “Preparing the convertible notebook” on page 5.

2Loosen the two memory bay cover screws that secure the memory cover. (These screws cannot be removed.)

Screw

Screw

3Remove the memory bay cover. Be careful not to break off the tabs located on the bottom of the cover. If the cover does not remove easily, wiggle the cover to loosen it.

8