Replacing Convertible Notebook Components
9Remove the old USB/Firewire board from the convertible notebook.
10Place the new USB/Firewire board into the convertible notebook. The holes in the board should fit around the posts in the bay.
11Connect the USB/Firewire cable to the USB/Firewire board.
12Replace the palm rest by following the steps in “Replacing the palm rest” on page 25.
13Replace the hard drive by following the steps in “Replacing the hard drive” on page 17.
14Replace the DVD drive by following the steps in “Replacing the DVD drive” on page 14.
15Replace the wireless bay cover by following the steps in “Replacing the IEEE 802.11 wireless card” on page 10.
16Replace the memory bay cover by following the steps in “Adding or replacing memory modules” on page 6.
34