www.gateway.com
12Carefully separate the front and back of the LCD panel assembly.
Caution
The fingerprint reader cable connects the two halves. Lay the front of the LCD panel assembly beside the back half.
13Remove the four screws that connect the indicator/button board to the LCD panel assembly back.
Screw | Screw | Screw | Screw |
| |||
|
|
|
14Lift the indicator/button board off of the LCD panel assembly back, then turn it over.
15Disconnect the two cables from the old indicator/button board.
16Connect the two cables to the new indicator/button board.
17Replace the indicator/button board, then replace the four screws removed in Step 13.
18Press the two halves of the LCD panel front and back together in several places until they click in place. You should find no loose spots or spots where the two halves do not meet.
19Replace the eight LCD panel assembly screws removed in Step 11.
20Replace the eight rubber inserts removed in Step 10.
69