
Replacing Convertible Notebook Components
To replace the LCD assembly lid:
1Complete the steps in “Preparing the convertible notebook” on page 5.
2Remove the memory bay cover by following the steps in “Adding or replacing memory modules” on page 6.
3Disconnect the wireless antenna wires by following the steps in “Replacing the IEEE 802.11 wireless card” on page 10.
4Remove the DVD drive by following the steps in “Replacing the DVD drive” on page 14.
5Remove the hard drive by following the steps in “Replacing the hard drive” on page 17.
6Remove the hinge cover by following the steps in “Replacing the hinge cover” on page 23.
7Remove the palm rest by following the steps in “Replacing the palm rest” on page 25.
8Remove the system board by following the steps in “Replacing the system board” on page 35.
9Remove the LCD assembly by following the steps in “Replacing the LCD assembly” on page 51.
10Disconnect the fingerprint cable by following the instructions in “Replacing the fingerprint reader” on page 54.
11Remove the indicator/button board by following the instructions in “Replacing the indicator/button board” on page 67.
12Remove the inverter by following the instructions in “Replacing the inverter” on page 71.
13Remove the four screws connecting the LCD panel to the LCD lid.
Screw | Screw |
Screw | Screw |
78