
Replacing Convertible Notebook Components
7Disconnect the Bluetooth cable from the Bluetooth module.
Connector
8Lift the right end of the old Bluetooth module, then slide the module out of the rubber holder.
9Insert the left end of the new Bluetooth module under the flap in the rubber holder, then press the right end down. The notch in the right end of the module should fit around the pin located in the holder.
10Connect the Bluetooth cable to the Bluetooth module.
11Replace the palm rest by following the steps in “Replacing the palm rest” on page 25.
12Replace the hard drive by following the steps in “Replacing the hard drive” on page 17.
13Replace the DVD drive by following the steps in “Replacing the DVD drive” on page 14.
14Replace the wireless bay cover by following the steps in “Replacing the IEEE 802.11 wireless card” on page 10.
15Replace the memory bay cover by following the steps in “Adding or replacing memory modules” on page 6.
30