www.gateway.com

11Turn the audio board over, then disconnect the audio cable from the old audio board. Make sure you pull the plastic tab, not the cable.

12Connect the audio cable to the new audio board.

13Place the new audio board so that the large post in the bay fits within the large hole in the board, then replace the screw removed in Step 9.

14Replace the modem by following the steps in “Replacing the modem” on page 42.

15Replace the system board by following the steps in “Replacing the system board” on page 35.

16Replace the palm rest by following the steps in “Replacing the palm rest” on page 25.

17Replace the hard drive by following the steps in “Replacing the hard drive” on page 17.

18Replace the DVD drive by following the steps in “Replacing the DVD drive” on page 14.

19Reconnect the antenna wires to the wireless card by following the steps in “Replacing the IEEE 802.11 wireless card” on page 10.

20Replace the memory bay cover by following the steps in “Adding or replacing memory modules” on page 6.

47