
www.gateway.com
12Carefully open the LCD panel, then remove the two front LCD hinge screws.
Screw | Screw |
13Lift the old LCD assembly off of the convertible notebook.
14Place the new LCD assembly on the convertible notebook. Make sure that the antenna wires and LCD cable are routed between the front hinge screw posts.
15Replace the screws removed in Step 12.
16Carefully close the LCD panel, then replace the screws removed in Step 11.
17Open the LCD panel, then replace the grounding screw removed in Step 10.
18Feed the antenna wires into the wireless bay.
19Replace any tape that held the antenna wires and LCD cable.
20Replace the system board by following the steps in “Replacing the system board” on page 35.
21Replace the palm rest by following the steps in “Replacing the palm rest” on page 25.
22Replace the hinge cover by following the steps in “Replacing the hinge cover” on page 23.
23Replace the hard drive by following the steps in “Replacing the hard drive” on page 17.
24Replace the DVD drive by following the steps in “Replacing the DVD drive” on page 14.
25Reconnect the antenna wires to the wireless card by following the steps in “Replacing the IEEE 802.11 wireless card” on page 10.
26Replace the memory bay cover by following the steps in “Adding or replacing memory modules” on page 6.
53