www.gateway.com

Replacing the system board

Tools you need to complete this task:

v

Flat-blade driver

- OR -

Scribe or non-marring tool

Phillips #0 screwdriver

Screws removed during this task:

2 black 2.0*3.0 (IEEE

802.11 wireless card)

2 black 2.0*6.0 (Palm rest-bottom)

7 black 2.5*4.5 (Palm rest-bottom)

To replace the system board:

1 black 2.5*3.0 (DVD drive)

3 black 2.5*3.0 (Palm rest-DVD drive bay)

3 black 2.5*6.0 (Palm rest-top)

2 black 2.5*3.0 (hard drive)

3 black 2.5*2.2 (Palm rest-hard drive bay)

3 black 2.5*4.5 (System board)

1Complete the steps in “Preparing the convertible notebook” on page 5.

2Remove the memory by following the steps in “Adding or replacing memory modules” on page 6.

35