www.gateway.com

Some surge protectors and uninterruptible power supplies include simple line-conditioning capabilities.

Uninterruptible power supplies

Use an uninterruptible power supply (UPS) to protect your server from data loss during a total power failure. A UPS uses a battery to keep your server running temporarily during a power failure and lets you save your work and shut down your server. You cannot run your server for an extended period of time while using only the UPS. To buy a UPS, visit accessories.gateway.com.

Mounting your server into a cabinet

Caution

Before attaching cabinet accessories, make sure that the server is turned off and all power cords are unplugged.

The fixed-rail cabinet mounting hardware included with your server should be used with standard 4-post cabinets that have front and back vertical posts. If your cabinet is a different type, obtain mounting hardware from the cabinet manufacturer.

Caution

The cabinet must provide sufficient airflow to the front of the server to maintain correct cooling.

The fixed-rail rackmount kit contents:

•Front server rails (2)

•Back server rails (2)

•Fastener pack (1)

•Locking screws (4)

•Mounting nuts (4)

•Mounting screws (4)

If you ordered the optional tooless-rail kit for your server, refer to the instructions included in the kit.

To mount your server in a cabinet:

1Align the slots in the front server rails with the studs on the side of the server, then engage the slots with the studs and slide the rails forward until they stop.

 

Front server rail (installed)

 

Stud

Stud

Locking screw (installed)

 

2Align the locking screw holes in the rails with the threaded screw holes in the server, then install one locking screw through the each front server rail.

11