CHAPTER 4: Installing Components

12Tighten the two system board thumbscrews you loosened in Step 8.

13Connect the cables you removed in Step 7

14Install the memory by following the instructions in “Installing memory” on page 36.

15Install the processor and heatsink by following the instructions in “Replacing or adding a processor” on page 43.

16Reinstall the PCI riser assembly by following the instructions in “Installing and removing PCI expansion cards” on page 39.

17Reinstall the system fans and fan cage by following the instructions in “Replacing system fans” on page 41.

18Follow the instructions in “Closing the server case” on page 30.

19Turn on your server, then press F2 at any time after you see the LEDs on your keyboard flash or turn off. The BIOS Setup utility opens.

20Check BIOS settings to make sure that they detect the server’s new hardware, then save your changes (if any) and close the BIOS Setup utility.

21If your server does not start after installing the new system board, contact Gateway Customer Care. For more information, see “Getting Help” on page 8.

54