
www.gateway.com
6Insert the diskette drive/adapter assembly into the
Thumbscrew
Diskette drive/adapter assembly (inserted)
7Connect a USB cable from the USB floppy drive connector (J27) on the system board to the back of the diskette drive.
8Follow the instructions in “Closing the server case” on page 30.
9Reinstall the bezel, if required, by snapping it into place on the front of the chassis.
10Reconnect all power cords and peripheral device cables, then turn on the server.
Filling empty drive baysEmpty drive bays in the server must be filled by empty drive trays. With the bezel removed, install the appropriate tray, then replace the bezel by snapping it into place on the front of the server. Empty drive carriers for unused drive bays are included with your server.
35