
CHAPTER 4: Installing Components
Replacing the ROMB battery pack for the mezzanine RAID card
Warning
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of or recycle used batteries by taking them to a hazardous waste facility. Follow all local regulations for correct battery disposal.
To replace the ROMB battery pack for the mezzanine RAID card:
1Follow the instructions in “Preventing static electricity discharge” on page 28. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server.
2Follow the instructions in “Opening the server case” on page 29.
3Press the release handle (1), then slide the ROMB battery pack for the mezzanine RAID card
(2) toward the back of the chassis to release it from the locking tabs and lift it out of the chassis (3).
4Align the holes in the bottom of the new ROMB battery pack for the mezzanine RAID card
(1) with the locking tabs in the chassis, then press it into place in the chassis.
5Slide the ROMB battery pack for the mezzanine RAID card (2) toward the front of the chassis until it clicks into place.
6Follow the instructions in “Closing the server case” on page 30.
50