Gateway E-9425R Installing the bezel

CHAPTER 2: Setting Up Your Server

Warning

You must support the server while installing or removing the front and back mounting screws. If the server is not supported, damage to the server or injury may result.

8Align the mounting screw holes in the server handles with the front mounting nuts, then secure the front in place with two mounting screws (one on each side).

Server

Mounting screw

Installing the bezel

To install the bezel:

1With the server pulled out from the cabinet, align the holes in the handles with the holes in the sides of the server.

2Attach the handles to the sides of the server with two mounting screws on each side.

Mounting screw

Handle

Server (side)

Mounting screw

14