www.gateway.com
4If desired, you can opt to enable the Password on boot parameter.
5When you are done, press u to save the changes and exit the BIOS Setup Utility.
Removing a Password
Follow these steps:
1Use the w and y keys to highlight the Set Supervisor Password parameter and press the e key. The Set Password box appears:
2Type the current password in the Enter Current Password field and press e.
3Press e twice without typing anything in the Enter New Password and Confirm New Password fields. The computer then sets the Supervisor Password parameter to “Clear”.
4When you have changed the settings, press u to save the changes and exit the BIOS Setup Utility.
Changing a Password
Follow these steps:
1Use the w and y keys to highlight the Set Supervisor Password parameter and press the e key. The Set Password box appears:
2Type the current password in the Enter Current Password field and press e.
3Type a password in the Enter New Password field. Retype the password in the Confirm New Password field.
4Press e. After seeing the password, the computer sets the User Password parameter to “Set”.
5If desired, you can enable the Password on boot parameter.
6When you are done, press u to save the changes and exit the BIOS Setup Utility.
