ADAC Ultra2 S466 Specifications

Parameter

Card Size

Processor

Bus Type

PCI Controller

Bus Data Transfer Rate

BIOS

Cache Configuration

Firmware

Nonvolatile RAM

Operating Voltage

SCSI Controller

SCSI Data Transfer

Rate

SCSI Bus

SCSI Termination

Termination Disable

Devices per SCSI

Channel

SCSI Device Types

Supported

RAID Levels Supported

SCSI Connectors

Serial Port

Specification

7.375" x 4.2" (half length PCI)

Intel i960RP™ 32-bit RISC processor @ 33 MHz

PCI 2.1

Intel i960RP

Up to 132 MB/s

AMIBIOS ADAC Ultra2 S466 BIOS

4, 8, 16, 32, 64, or 128 MB through a 60 ns × 36 Fast Page Mode or EDO 72-pin SIMM.

1 MB × 8 flash ROM

32 KB × 8 for storing RAID configuration

5.00 V ± 0.25 V

One SCSI controller for Ultra and Wide support.

Up to 80 MB/s

LVD or single-ended

Active

Automatic through cable and device detection

Up to 15 wide or seven non-wide SCSI devices. Up to 6 non-disk SCSI drives per ADAC Ultra2 S466 controller.

Synchronous or Asynchronous. Disk and non-disk.

0, 1, 3, 5,10, 30, and 50

One 68-pin internal high-density connector for 16- bit SCSI devices. One ultra-high density 68-pin external connector for Ultra and Wide SCSI.

9-pin RS232C-compatible berg

34ADAC Ultra2 S466 Hardware Guide