Step 11 Run ADAC BIOS Setup

Press <Ctrl> <M> to run the ADAC BIOS Setup utility. See the ADAC Ultra2 S466 Configuration Software Guide for information about running BIOS Setup.

Step 12 Install Operating System Driver

The ADAC Ultra2 S466 ASPI driver can be used in the DOS and Windows 95 environments. The DOS ASPI driver supports:

∙up to six non-disk SCSI devices (each SCSI device must use a unique SCSI ID regardless of the SCSI channel it resides on. SCSI IDs 1 through 6 are valid,

∙up to 12 ADAC Ultra2 S466 adapters, and

∙virtual DMA services (VDS) for up to eight logical drives.

ASPI Driver CorelSCSI, Novaback, and PC Tools are not provided with ADAC Ultra2 S466.

Drivers

Devices Supported

Application Software

Features

ADACASPI.SYS

CD-ROM, tape,

CorelSCSI, Novaback, PC

VDS

 

optical drives, etc.

Tools.

 

Copy ADACASPI.SYS to your hard disk drive. Add the following line to CONFIG.SYS:

device=<path>\ADACASPI.SYS /v

Parameters The ADACASPI.SYS parameters are:

Parameter

/h

/v

/a

/q

Description

INT 13h support is not provided.

Verbose mode. All message are displayed on the screen.

Physical drive ccess mode. Direct access to physical drives is permitted.

Quiet mode. All message except error message are suppressed.

Cont’d

70ADAC Ultra2 S466 Hardware Guide