BIOS Boot Error Messages
Message
Adapter BIOS Disabled. No Logical Drives Handled by BIOS
Host Adapter at Baseport xxxx Not Responding
No ADAC Ultra2 S466 Adapter
Configuration of NVRAM and drives mismatch.
Run View/Add Configuration option of Configuration Utility. Press any key to run the Configuration Utility.
1 Logical Drive Failed
Problem
The ADAC Ultra2 S466 BIOS is disabled. Sometimes the BIOS is disabled to prevent booting from the BIOS.
The BIOS cannot communicate with the adapter firmware.
The BIOS cannot communicate with the adapter firmware.
The configuration stored in the ADAC Ultra2 S466 adapter does not match the configuration stored in the drives.
A logical drive failed to sign on.
Suggested Solution
Enable the BIOS via the ADAC Ultra2 S466 BIOS Setup utility.
Make sure ADAC Ultra2 S466 is properly installed.
Make sure ADAC Ultra2 S466 is properly installed.
Press a key to run ADAC Configuration Manager.
Choose View/Add Configuration from the Configure menu.
Use View/Add Configuration to examine both the configuration in NVRAM and the configuration stored on the disk drives. Resolve the problem by selecting one of the configurations.
Make sure all physical drives are properly connected and are powered on.
Run ADAC Configuration Manager to find out if any physical drives are not responding. Reconnect, replace, or rebuild any drive that is not responding.
Chapter 7 Troubleshooting | 75 |