Topic |
|
| Information | ||
Windows NT |
| When Windows NT is installed via a bootable CD, the | |||
Installation |
| devices on the ADAC Ultra2 S466 will not be recognized | |||
|
|
| until after the initial reboot. The Microsoft documented | ||
|
|
| workaround is in SETUP.TXT: | ||
|
|
| SETUP.TXT is on diskette 2 or the CD | ||
|
|
| To install drivers when Setup recognizes one of the | ||
|
|
| supported SCSI host adapters without making the devices | ||
|
|
| attached to it available for use: | ||
|
| 1 | Restart Windows NT Setup. | ||
|
| 2 | When Windows NT Setup displays | ||
|
|
|
| Setup is inspecting your computer’s hardware | |
|
|
|
| configuration..., | |
|
|
|
| press <F6> to prevents Windows NT Setup from | |
|
|
|
| performing disk controller detection. This allows | |
|
|
|
| you to install the driver from the Drivers disk you | |
|
|
|
| created. All SCSI adapters must be installed | |
|
|
|
| manually. | |
|
| 3. | When Windows NT Setup displays | ||
|
|
|
| Setup could not determine the type of one or more | |
|
|
|
| mass storage devices installed in your system, or | |
|
|
|
| you have chosen to manually specify an adapter, | |
|
|
|
| press S to display a list of supported SCSI host | |
|
|
|
| adapters. | |
|
| 4 | Select Other from the bottom of the list. | ||
|
| 5 | Insert the Drivers Disk you made when prompted | ||
|
|
|
| to do so and select ADAC Ultra2 S466 from this | |
|
|
|
| list. In some cases, Windows NT Setup repeatedly | |
|
|
|
| prompts to swap disks. Windows NT will now | |
|
|
|
| recognize any devices attached to this adapter. | |
|
|
|
| Repeat this step for each host adapter not already | |
|
|
|
| recognized by Windows NT Setup. | |
|
|
|
|
|
|
Chapter 7 Troubleshooting | 81 |