2.2 COMMAND LIST The various commands are split in different groups, depending on the involved functionality, and are
listed here in accordance with their group classification.
The command-line interface includes a command auto-completion feature. Normally, typing a
command without any parameter displays usage information on the command. A help command is
also available.
Note that all commands are case-sensitive.
2.2.1 General command group
The general command group consists of the following commands:
Command Parameters Description
help
general | network | dns |
user | service |
time | smtp | snmp |
trap | ups | rccmd |
events | log
Show help information
general shows all general commands
network shows all network commands
etc …
list List all available commands
version Display the board FW version
logout User logout
NOTE: Auto-logout after 10 min inactivity
exit User logout
Change current user password
passwd NOTE: Password length is limited to 8 chars.
The command line interface may accept longer passwords, although
only the first 8 characters are significant.
ping [hostname] | [X.X.X.X]
Ping IP address or hostname
hostname fully qualified hostname
X.X.X.X IP-address
nvdefault Reset the configuration to factory default
nvsave Save changes to non-volatile memory
nvdump Dump configuration file (gedeups.cfg) to FTP area
Update the SNMP/Web configuration with the gedeups.cfg file from
the FTP area
nvupdate NOTE: The adapter performs no checks on the received file. Make sure
the file format is correct - unexpected behaviour may occur.
upgrade Start the upgrade with the uploaded firmware
NOTE: FW file to be uploaded via FTP
reboot System restart (soft-reset)
NOTE: All unsaved changes will be lost
Modifications reserved Page 14/58
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc Operating Manual SNMP/Web Adapter