GE 1019070, 1019071, 23954 3.4 SYSTEM SECTION

3.4 SYSTEM SECTION

3.4.1 Network page

Network configuration of the card – refer to the NETWORK CONFIGURATION chapter within this manual.

Note that the settings on this page will only take effect after a reboot of the card.

3.4.2 Date&Time page

Through this page it is possible to configure the adapter date and time settings. The SNMP/Web adapter

features an internal real-time-clock, and provides different ways to synchronise its clock with the actual

time:

• NTP server: the card will periodically re-synch its int ernal date and time with the NTP server

• Manual: the card date and time are set by the user

• Browser: the card date and time will synch with the browser time

Regardless of the chosen configuration, make sure the correct timezone is selected. The timezone

setting also affects autocorrection for the daylight saving time.

3.4.3 RCCMD page

This page shows the current configuration for the Network Shutdown (RCCMD) functionality. The various

RCCMD clients are listed, with three action buttons:

• Edit: edit the RCCMD Client configuration

• Test: send an RCCMD Test Message to the Client

• Del: delete the RCCMD Client

New RCCMD Clients can be added with the Add button.

The page to Add/Edit RCCMD clients requires to specify the following information:

• Client: RCCMD Client IP Address or hostname

• Port: RCCMD Port on the Client, default is 600 3

• Condition: three different shutdown conditions can be chosen:

o After X minutes on battery

o At X minutes remaining of battery autonomy

o When the UPS signals a Low Battery condition

NOTE: Although the web interface accepts hostnames to identify RCCMD Clients, it is strongly

recommended to identify the clients with their IP address. Using symbolic hostnames may cause the

network shutdown to fail in case the DNS server is not available, unreachable or mis-configured

3.4.4 Password page

This page allows the currently connected user to modify its password. Clearly, this page only allows

modification to the current users. The account of other users can be managed only by the uspervisor

users in the User section.

NOTE: The password length is limited to 8 chars.

Modifications reserved Page 31/58

OPM_CNT_SNM_BAS_CRD_1GB_V012.doc Operating Manual SNMP/Web Adapter

Contents

Main GE Digital Energy Power Quality Operating Manual SNMP / WEB ADAPTER GE imagination at work Page g Table of contents Page Page 1 INTRODUCTION 1.1 FEATURES 1.2 OVERVIEW Page Page 1.3 ARCHITECTURE 1.4 SAFETY 2 CONSOLE INTERFACE 2.1 INTRODUCTION 2.1.1 Local connection 2.1.2 Remote connection 2.1.3 Log-on 2.1.4 Saving the settings 2.2 COMMAND LIST 2.2.1 General command group 2.2.2 Network command group 2.2.3 DNS command group 2.2.4 User command group 2.2.5 Service command group 2.2.6 Time command group 2.2.7 Smtp command group 2.2.8 Snmp command group 2.2.9 Trap command group 2.2.10 UPS command group 2.2.11 Rccmd command group 2.2.12 Events command group 2.2.13 Log command group 3 WEB INTERFACE 3.1 INTRODUCTION 3.1.1 Supported browsers 3.1.2 Initial web access 3.1.3 Sample page 3.2 NAVIGATION BAR 3.3 UPS SECTION 3.3.1 UPS Identification page 3.3.2 Battery page The Battery page shows the following information. 3.3.3 UPS Status page The UPS status page shows the following information for each of the input / output / bypass lines. Also the following information is presented: Finally, a 3-ph system featuring the PMAD functionality will also show the following: 3.3.6 UPS Test page 3.3.7 UPS Control page (1-ph/SP units ONLY) 3.3.8 UPS Config page 3.4 SYSTEM SECTION 3.4.1 Network page 3.4.2 Date&Time page 3.4.3 RCCMD page 3.4.4 Password page 3.5 SNMP SECTION 3.5.1 SNMP settings page 3.5.2 Trap settings page 3.5.3 Alarm notification page 3.6 SMTP SECTION 3.6.1 SMTP configuration page 3.6.2 Alarm notification page 3.7 LOG SECTION 3.8 UTILITY SECTION 3.9 SAVE SECTION 3.10 USER SECTION 4 SNMP AGENT 4.1 MIB STRUCTURE 4.2 RFC1628 MIB OBJECTS Page 4.3 GE MIB OBJECTS Page 5 NETWORK CONFIGURATION 5.1 ETHERNET CONNECTION 5.2 TCP/IP CONFIGURATION 5.2.1 Static IP address 5.2.2 BOOTP / DHCP 5.3 DNS CONFIGURATION 5.4 HOSTNAME 6 MULTI-SERVER NETWORK SHUTDOWN (RCCMD) 6.1 NETWORK SHUTDOWN WITH RCCMD 6.1.1 Set-up and Configuration of controlled Servers 6.1.2 Configuration of the SNMP/Web adapter 6.1.3 Network configuration 6.1.4 RCCMD Shutdown 6.2 RCCMD CLIENT RELAY 7 SECURITY 7.1 USER AUTHENTICATION & AUTHORISATION 7.1.1 User Management 7.1.2 User class 7.1.3 Selective service activation 7.2 SERVICES (ACCESS METHODS) 7.3 ENCRYPTION 7.3.1 SSH and SFTP Page 7.3.2 SSL Certificates Page 7.4 CUSTOMER RESPONSIBILITY 7.4.1 Physical security 7.4.2 Changing default configuration 7.4.3 User & Service management 7.4.4 Encryption 8 OTHER FUNCTIONALITIES 8.1 SYSTEM TIME 8.2 SERIAL BY-PASS (1-PH/SP VERSION ONLY) 8.3 HTTP BASED MONITORING (1-PH/SP VERSION ONLY) 8.3.1 UPS Load Alert 9 MAINTENANCE 9.1 SOFTWARE UPGRADE 9.2 CONFIGURATION FILE 9.3 LOGS 10 TROUBLESHOOTING 10.1 TROUBLESHOOTING UPS CONNECTION 10.1.1 3-ph SNMP/Web plug-in adapter 10.1.2 1-ph SNMP/Web external adapter 10.2 TROUBLESHOOTING LOCAL CONNECTION 10.3 TROUBLESHOOTING NETWORK CONNECTION 10.4 TROUBLESHOOTING WEB ACCESS 10.5 TROUBLESHOOTING DATE&TIME (NTP) 10.6 TROUBLESHOOTING E-MAIL NOTIFICATION (SMTP) 10.7 TROUBLESHOOTING NETWORK SHUTDOWN 11 CUSTOMER SUPPORT 11.1 FIRST LINE SUPPORT 11.2 INTERNET 11.3 WWW SERVER