CARE AND CLEANING
(continued)
Probe
The temperature probe may be cleaned with soap and water or a
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
Oven Light Bulb
NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.
The light bulb is located on the top of the oven. Before replacing the bulb, disconnect electrical power to the oven at the main fuse or circuit breaker panel. Let the bulb cool completely before removing it. For your safety, do not touch a hot bulb with a damp cloth. If you do, the bulb will break.
To remove: Turn to remove the cover, then remove the bulb.
To replace: Put in a new
NOTE:
•A
•Install and tighten the cover.
•Reconnect electrical power to the oven.
Socket
Bulb
31⁄2″ Max. length
Glass cover
Oven Heating Elements
Do not clean the bake element or the broil element.
Any soil will burn off when the elements are heated.
The bake element can be lifted gently to clean the oven floor. If spillovers, residue or ash accumulate around the bake element gently wipe around the element with warm water.
Broil element
Bake element
Control Panel
It’s a good idea to wipe the control panel after each use. Clean with mild soap and water or vinegar and water, rinse with clean water and polish dry with a soft cloth.
Do not use abrasive cleansers, strong liquid cleaners, plastic scouring pads or oven cleansers on the control
36