GE 164D2966P205-1 manual How to Set Delay Start of Cleaning, After Self-Cleaning

OPERATING THE SELF-CLEANING OVEN

(continued)

How to Set Delay Start of Cleaning

Easy Steps:

1.Press AUTO SELF CLEAN.

2.Press the number pads to set the clean time.

3.Press DELAY START.

4.Press the number pads to set the start time.

5.Press START.

Delay Start is setting the oven to start the clean cycle automatically at a later time than the present time of day.

NOTE: Before beginning, make sure the oven clock shows the correct time of day.

1.Follow the steps in the Before a Clean Cycle section.

AUTO SELF 2. Press AUTO SELF CLEAN.

C L E A N

3.Press the number pads to set the clean time.

DELAY	4. Press DELAY START.
START

5.Press the number pads to set the time of day you want the clean cycle to start.

6.Press START.

START

The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off.

7.When the LOCKED DOOR light is off, open the door.

NOTE: You can set a delay clean in both ovens at the same time. The second oven set will automatically delay the start of cleaning until the end of the first oven’s clean cycle.

After Self-Cleaning

You may notice some white ash in the oven. Just wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

NOTE:

•No functions can be programmed before the door automatically unlocks.

•If the shelves have become hard to slide, wipe the shelf supports with cooking oil.

32