GE 1908 - 36 manual The Anti-Tip Device Supplied With The Range Must Be Correctly Fit

HANDLING AND INSTALLATION INSTRUCTIONS Anti-Tip Device

8.INSTALLATION OF AN ANTI-TIP DEVICE

WARNING

THE ANTI-TIP DEVICE SUPPLIED WITH

THE RANGE MUST BE CORRECTLY FIT-

TED WHEN THE APPLIANCE IS INSTAL-

LED. THIS WILL REDUCE RISK OF TIP-

PING OF THE APPLIANCE FROM

ABNORMAL USAGE OR BY EXCESSIVE

LOADING OF THE OVEN DOOR.

WARNING

The range must be secured into place using the anti-tip device, as instructed below. Unless properly installed, the range could be tipped by applying weight to the door. Injury might result from spilled hot liquids or from the range itself.

1.The installation kit for the anti-tip device includes:

a) a chain made of 6 metal rings with a 3.8 mm diameter wire, b) one 6 mm diameter hex head screw with washer,

c) one 60 mm long snap hook, with a 6 mm diameter wire, d) one plug for 10 mm drill hole diameter, length 50 mm, e) one 5 mm diameter screw-in stud.

a b c d e

The axis for the hole

2.On the floor, mark the axis for the hole as shown on the diagram opposite, taking into account the position of the range in relation to the back wall.

27.5" (700 mm)

5" (130 mm)

36" (914 mm)

Installation and User Guide CornuFé 1908 - 36" - USA / Can 21

08NOTINSTALFE8/USA-1