Cooktop burners | INSTRUCTIONS FOR USE |
|
|
INSTRUCTIONS FOR USE
IMPORTANT
Please make sure your cooker is unpacked completely before use.
Remove all tape and packaging. Make sure the burners are properly placed and level. Take the accessory pack out of the oven. Check to be sure that no parts have come loose during shipping.
INITIAL IGNITION
Defuse any trapped air from the gas network, starting with each of the burners on the cooktop. Once this is done, the gas oven can then be ignited. However, if the safe- ty device for the oven is activated (red indicator ON), press the reset button above the red indicator to repeat the procedure.
1.STARTING WITH THE COOKTOP BURNERS
Before using the cooktop make sure all burners are in place and all the grates on the range are properly placed.
The drawing by each knob indicates which burner that knob controls (Fig. 9).
The gas burners on our CornuFé 1908 - 36" range appliances are fitted with safety thermocouples: if a burner shuts off for any reason, the gas supply for that burner is automatically stopped.
The thermocouple should not be activated for more than 15 seconds; if, after this time, the burner has not ignited, you should stop trying to ignite, and wait at least one minute before trying to reignite the burner.
All of our appliances are equipped with automatic gas burner ignition.
To ignite a gas burner, press the control knob and turn it to the left to the "high flame" position (Fig. 10). The burner is automatically ignited. Keep the knob pressed (Fig. 11) for 5 – 10 seconds (the safety thermocouple may take longer to react the first time). The sparking noise means that the ignition system is operating normally.
When a cooktop burner knob is pressed in, sparks will be made at every burner – this is normal. Do not attempt to disassemble or clean around any burner while another burner is on. An electric shock could result.
Fig. 9
Fig. 10
Fig. 11 |
| Fig. 12 |
|
|
|
28 | Installation and User Guide CornuFé 1908 - 36" - USA / Can |
