GE 1908 - 36 manual Conversion To Propane Gas, Orifices

Models: 1908 - 36

1 52
Download 52 pages 4.01 Kb
Page 42
Image 42
Orifices

Orifices

CONVERSION TO PROPANE GAS

 

 

CONVERSION TO PROPANE GAS

This appliance is supplied set for Natural gas. A conversion kit for Propane gas is supplied with the range. If the appliance is to be converted this must be done before installation. The conversion must be performed by a qualified LP gas installer. After conversion the installation must comply with the relevant regulations and also the local electricity supply company require- ments. Read the instructions before converting this appliance. Failure to convert the appliance cor- rectly could invalidate any warranty or liability claims and lead to prosecution. This instruction must be used in conjunction with the rest of the appliance instruction, in particular for informa- tion on Standards, range positioning, connection hose suitability etc. When servicing or replacing gas-carrying components disconnect from gas before commencing operation and check appliance is gas sound after completion. Do not use re-conditioned or unauthorized gas controls.

Caution: Before proceeding with the conversion, shut off the gas supply to the appliance prior to disconnecting the electrical power.

1.ORIFICES

The orifices size depends on the type of gas. The table below is provided for you to determine which orifice should be used if the type of gas is changed.

B

B

A

C

40

Installation and User Guide CornuFé 1908 - 36" - USA / Can

08NOTINSTALFE8/USA-1

Page 42
Image 42
GE 1908 - 36 manual Conversion To Propane Gas, Orifices