GE 1908 - 36 manual Push the range into its position. The chain must hang over the stud

Anti-Tip Device HANDLING AND INSTALLATION INSTRUCTIONS

3.Drill a 3.5 mm diameter hole in the timber floor and screw the stud directly into the floor.

4.Where the floor consists of tiles, concrete or another hard material, drill a 10 mm diameter hole, push in the plug and screw the stud into it.

5.Using the hex head screw and the No. 10 open-end spanner, fasten the chain to the frame at the back of the range. Make sure to properly secure the chain between the frame and the washer.

6.Push the range into its position. The chain must hang over the stud.

7.Remove the drawer at the bottom of the range by lifting it slightly.

8.Reach the chain through the drawer opening in the

front.

22 Installation and User Guide CornuFé 1908 - 36" - USA / Can

08NOTINSTALFE8/USA-1