Oven Light | MAINTENANCE |
|
|
4.CONVERTING FOR HIGH ALTITUDE
If the range is to be used above 5,000ft (1,500m) the burner orifices must be changed. This conversion must be performed by a qualified gas installer.
Read the instructions before converting this appliance.
Failure to convert the appliance correctly could invalidate any warranty or liability claims and lead to prosecution.
When servicing or replacing
Use the correct orifices for high altitude given by La Cornue service only for your appliance. When you have completed the changes, check the appliance is gas sound.
CAUTION: DO NOT USE A FLAME TO CHECK FOR GAS LEAKS.
Do not use
Save the orifices removed from the appliance for future use.
Check operation of all the burners.
After conversion the installation must comply with the relevant regulations and also the local electricity supply company requirements.
5.REPLACING THE OVEN LIGHT
The light is located on the side at the top of the oven; it is automatically switched on when the oven door is opened.
Please note: disconnect your stove before interfering with the light to prevent any risk of an electrical shock and to allow the appliance to cool down (if necessary).
Remove the protection glass and then unscrew the damaged light.
Refit a new light and the protection glass.
Technical characteristics of the light:
- 25W | - 230V - 240V |
- 300°C | - E14 base |
44 | Installation and User Guide CornuFé 1908 - 36" - USA / Can |
