Care and cleaning of the refrigerator.

GEAppliances.com

Cleaning the Outside

The dispenser drip area, (on some models) beneath the grille, should be wiped dry. Water left in this area may leave deposits. Remove the deposits by adding undiluted vinegar to the well. Soak until the deposits disappear or become loose enough to rinse away.

The dispenser cradle (on some models). Before cleaning, lock the dispenser by pressing and holding the Lock pad for 3 seconds. Clean with warm water

DQGEDNLQJVRGDVROXWLRQ³DERXWDWDEOHVSRRQ  ml) of baking soda to a quart (1 l) of water. Rinse thoroughly and wipe dry.

The door handles and trim. Clean with a cloth dampened with soapy water. Dry with a soft cloth.

Keep the outside clean. Wipe with a clean cloth lightly dampened with kitchen appliance wax or mild liquid dish detergent. Dry and polish with a clean, soft cloth.

The stainless steel door panels and handles. The stainless steel panels can be cleaned with a commercially available stainless steel cleaner or a similar product using a clean, soft cloth. Do not use appliance wax, polish, bleach or products containing chlorine on stainless steel doors and handles.

For best results, GE recommends using stainless steel cleaner PM10X311 with the WX10X307 polishing cloth, or for convenience the SS cleaning wipes, part number WX10X10001.

Do not wipe the refrigerator with a soiled dish cloth or wet towel. These may leave a residue that can erode the paint. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and weaken the paint finish.

Cleaning the Inside

To help prevent odors, leave an open box of baking soda in the refrigerator and freezer compartments.

Unplug the refrigerator before cleaning. If this is not practical, wring excess moisture out of sponge or cloth when cleaning around switches, lights or controls.

8VHZDUPZDWHUDQGEDNLQJVRGDVROXWLRQ³DERXW a tablespoon (15 ml) of baking soda

to a quart (1 l) of water. This both cleans and neutralizes odors. Rinse and wipe dry.

After cleaning the door gaskets, apply a thin layer of petroleum jelly to the door gaskets

at the hinge side. This helps keep the gaskets from sticking and bending out of shape.

Drain opening in freezer compartment. During yearly cleaning, remove bottom freezer pan and

IOXVKDVROXWLRQRIEDNLQJVRGD³WHDVSRRQ PO 

DQGFXSV PO RIKRW QRWERLOLQJ ZDWHU³ through the drain line with the help of a meat baster. This will help eliminate odor and reduce the likelihood of a clogged drain line. If drain becomes clogged, use a meat baster and baking soda solution to force the clog through the drain line.

Avoid cleaning cold glass shelves with hot water because the extreme temperature difference may cause them to break. Handle glass shelves carefully. Bumping tempered glass can cause it to shatter. Do not wash any plastic refrigerator parts in the dishwasher.

Behind the Refrigerator

Be careful when moving the refrigerator away from the wall. All types of floor coverings can be damaged, particularly cushioned coverings and those with embossed surfaces.

Pull the refrigerator straight out and return it to position by pushing it straight in. Moving the refrigerator in a side

direction may result in damage to the floor covering or refrigerator.

When pushing the refrigerator back, make sure you don’t roll over the power cord or icemaker supply line (on some models).

Preparing for Vacation

For long vacations or absences, remove food and unplug the refrigerator. Clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 l) of water. Leave the doors open.

Slide the icemaker power switch to the OFF position and shut off the water supply to the refrigerator.

Preparing to Move

Secure all loose items such as grille, shelves and drawers by taping them securely in place to prevent damage. Be sure the refrigerator stays in an upright position during moving.

Replacing the Light Bulbs

NOTE: Turning the refrigerator to the 0 (off) setting via the controls does not shut off electrical power to the refrigerator.

Unplug the refrigerator.

Remove the shelf just below the light shield.

Replace with an appliance bulb of the same or lower wattage.

Reinstall the shelf and plug the refrigerator back in.

9

Page 8 Page 10
Page 9
Image 9
GE 22, 20 manuel dutilisation Care and cleaning of the refrigerator
Page 8 Page 10

22, 20 specifications

The GE 20,22 series engines represent a significant evolution in aviation technology, embodying advancements that enhance efficiency, reliability, and environmental sustainability. As part of General Electric's commitment to innovation in aerospace propulsion, these engines are designed to meet the rigorous demands of modern commercial aviation while minimizing their environmental footprint.

One of the main features of the GE 20,22 engines is their high bypass ratio, which plays an integral role in achieving improved fuel efficiency. By maximizing the amount of air bypassing the engine core, these engines produce more thrust without a proportional increase in fuel consumption. This characteristic makes them ideal for long-haul operations, effectively reducing operating costs for airlines.

The engines also incorporate advanced materials and manufacturing techniques. The use of lightweight composite materials in fan blades and cases contributes to overall weight reduction, enhancing performance without sacrificing durability. Additionally, the integration of advanced ceramic matrix composites (CMCs) in critical components allows for higher operating temperatures, thereby increasing efficiency and reducing emissions.

Technologically, the GE 20,22 series engines are equipped with state-of-the-art digital control systems. These systems provide precise monitoring and adjustments during operation, leading to optimal performance and reduced maintenance requirements. The implementation of real-time data analytics allows for predictive maintenance, enabling operators to anticipate issues before they arise, thereby improving overall reliability.

Noise reduction is another critical characteristic of the GE 20,22 engines. They feature designs and technologies that significantly diminish noise levels during operation, addressing the growing concerns of communities around airports. This commitment to reducing noise, in conjunction with lower emissions, aligns with global efforts to create a more sustainable aviation industry.

Finally, the GE 20,22 engines are compatible with alternative fuels, showcasing General Electric’s forward-thinking approach to sustainability. As the aviation sector moves towards greener solutions, these engines are positioned to use biofuels and synthetic fuels, further decreasing their ecological impact.

In conclusion, the GE 20,22 series engines embody the latest in aerospace technology with their efficiency, reduced emissions, advanced materials, and noise reduction capabilities. Their design not only meets the needs of today’s airlines but also contributes to the industry's path towards a more sustainable future.
Top Page Image Contents