Unit beeps | • | Place the handset in the cradle for 20 seconds. If it still |
|
| beeps, charge battery for 12 hours. |
| • Clean charging contacts on cordless handset and charger | |
|
| with a soft cloth, remove comma or an eraser. |
| • See solutions for “No dial tone” on previous page. | |
| • | Replace battery. |
|
|
|
Memory Dialing | • | Did you program the (mem) memory location keys correctly? |
doesn't work | • | Did you follow proper dialing sequence? |
Unit locks up and no | • | Unplug the AC power supply from the wall outlet and the |
communication between |
| back of the base. Remove the handset battery. Wait for 30 |
the base and cordless |
| seconds and plug the power adapter back into the base |
handset |
| and wall outlet. Reconnect the battery and charge for 12 |
|
| hours. |
CALLER ID |
|
|
|
|
|
Problem |
| Solution |
|
|
|
No Display |
| • Is battery fully charged?Try replacing the battery. |
|
| • Make sure that the unit is connected to a |
|
| electrical outlet. Disconnect the AC power supply from the |
|
| base and reconnect it. |
|
|
|
Caller ID Error Message |
| • The unit displays this message if it detects anything other |
|
| than valid Caller ID information during the silent period |
|
| after the first ring.This message indicates the presence of |
|
| noise on the line. |
|
|
|
No Caller ID |
| • Did you order Caller ID service from your phone company? |
|
|
|
BATTERY
If you experience any of the following problems, even after fully recharging the battery, you may need to replace the battery pack:
•Short talk time
•Poor sound quality
•Limited range
•Charge/page or handset antenna indicator fails to light
48
