GE 28851 Installing the Phone

1

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before use.

CAUTION: To reduce the risk of re or personal injury, use only

the Thomson Inc. approved Model 5-2814 Nickel-metal Hydride

battery (Ni-MH), which is compatible with this unit.

1. Locate battery and battery door which are packaged together inside a plastic bag

and are separate from the handset.

. Locate the battery compartment on the back of the handset.

. Plug the battery pack cord into the jack inside the compartment.

NOTE: To ensure proper battery installation, the connector is keyed

and can be inserted only one way.

BATTERY

BLACK WIRE

RED WIRE

. Insert the battery pack.

5. Close the battery compartment by pushing the door up until it snaps into place.

PRESS DOWN

FIRMLY

Contents

Main Equipment Approval Information Interference Information Hearing Aid Compatibility (HAC) Licensing FCC RF Radiation Exposure Statement Information for DECT Product Page Table of Contents Introduction Before You Begin Parts Checklist Telephone Jack Requirements Installation Digital Security System Important Installation Guidelines Handset Layout Base Layout Installing the Phone Installing the Handset Battery BATTERY PRESS DOWN FIRMLY Base Station Answering System Setup Answerer Handset Access Set Prompt Language Rings to Answer Message Alert Security Code Speaker Volume Voice Instruction Recording the Outgoing Announcement Reviewing and Choosing the Announcement GOOG411 Programming the Telephone Add Records Inserting a Pause in the Dialing Sequence (of a Stored Number) Edit Records Delete Records Dialing a Number from Internal Memory Ignore The Incoming Call Room Monitor Set Alarm Clock Handset Setup Language Handset Name Ringer Tone Ringer Volume VIP Melody Storing VIP Melody Changing a Stored VIP Melody Record Reviewing And Deleting Stored VIP Melody Record Key Tone Set Day/Time Equalizer Area Code Tone/Pulse Registration De-Registration Global De-registration Default Setting Telephone Operation Visual Indicators Base Handset VMWI / Visual Ringer Indicator on Handset Speakerphone Operation Making a Call Answering Calls Ignore The Incoming Call Call Timer Auto Standby Ringer Volume (Shortcut) Flash/Call Waiting Last Number Redial Exit Page Handset to Handset Paging Paging All Handsets from a Handset Paging from the Base/Group Page Mute Receiver Volume Control Do Not Disturb (D-N-D) Intercom Operation Making an Intercom Call Receiving an Intercom Call Advanced Intercom Features Receiving an Incoming Call During an Intercom Call Using Intercom with External Telephone Calls Two-Way Calling Three-Way Calling Caller ID (CID) Call Waiting Caller ID Receiving CID Records Storing CID Records (In CID Memory) Reviewing CID Records Dialing a CID Number Storing CID Records in Internal Memory Deleting a CID Record Deleting All CID Records Answering System Operation Message Counter Indicator Leaving a Message/Memo Screening Calls from the Base Message Playback Memory Full Erasing Messages Remote Access Cordless Handset Screening Calls from the Handset Accessing the Answering System from Another Location Memory Full Belt Clip and Optional Headset Connecting the Belt Clip Connecting an Optional Headset to the Handset Changing the Battery Battery Safety Precautions Display Messages Page Answering System Display Messages Handset Sound Signals Troubleshooting Guide Telephone Solutions Caller ID Solutions Battery Solutions Answering System Solutions Causes of Poor Reception General Product Care Warranty Assistance Limited Warranty Page A B C D E I K L M P Accessory Information Visit the GE website at: www.GE.com/phones