
6. The receiving handset will turn on the microphone and the originating handset
will turn on the speakerphone to monitor sound from the receiving handset.
NOTE: For room monitoring mode to work, the originating handset
must NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will emit an
alert tone approximately every 5 seconds if there is an incoming
call. You may press the SPEAKER button to quit room monitor and
answer the call.
NOTE: While in room monitoring mode, the originating handset can be
switched to monitor by handset earpiece by pressing the TALK button
once. Switch back to speakerphone by pressing the SPEAKER button once.
NOTE: Press the END/cancel button on the handset to exit room
monitor mode.
Set Alarm Clock
1. Make sure your phone is OFF (not in TALK mode).
. Press the mute/menu OK/program button to go to the main menu.
. Press CALLER ID-VOLUME (6 or 5) button to scroll to ALARM.
. Press mute/menu OK/program button to enter the submenu, the screen displays
ALARM 1ON 2OFF.
5. Use the touch-tone pad to enter the selection, or use the CALLER ID-VOLUME
(6 or 5) button to scroll to 1ON or 2OFF.
6. If you select ON, press the mute/menu OK/program button to conrm and
advance Set Alarm Time sub-menu.
7. Use the number keys to enter the time, then use the #pause button to select AM
or PM.
8. Press the mute/menu OK/program button to conrm and advance Set Cycle
Time sub-menu.
9. Use the CALLER ID-VOLUME (6 or 5) button to select Once or Daily. The default
setting is Once.
10. Press the mute/menu OK/program button to save your selection. You will hear a
conrmation tone.
NOTE: If you select Daily, the system will follow the current time
setting to turn on the alarm.