1
. Select 2NO, if you do not want to de-register.
5. If you select 1YES, press the mute/menu OK/program button and MOVE NEAR TO
BASE displays for seconds, then CONFIRM? 1YES 2NO appears in the display.
6. Press the touch-tone pad to select 1YES or 2NO, or use the CALLER ID-VOLUME
(6 or 5) button to scroll to 1YES or 2NO.
7. If you select YES, press the mute/menu OK/program button to conrm. DE-The
screen displays REGISTER.... You will hear a conrmation tone. Then the screen
displays DEREGISTERED to conrm the handset is deregistered.
NOTE: When you complete the de-registration process,
The screen
displays
HANDSET NEEDS REGISTRATION. To use the handset, you
MUST re-register the handset using the Registration process.
Global De-registrationIf one or more handsets becomes lost, you should de-register all handsets to ensure
proper system operation.
WARNING: It is not recommended that a handset be de-
registered unless absolutely necessary because once a handset
is de-registered, that handset’s telephone features cannot be
used until the handset is re-registered.
1. Disconnect power from the base by pulling the plug out of the back of the unit.
. Press and hold the nd button and while holding the nd button reconnect the
power.
. Continue to hold the nd button until the charge/in use voicemail light ashes
rapidly.
. Release the nd button.
5. Press and release the nd button on the base once. All handsets are de-registered
and the screen displays HANDSET NEEDS REGISTRATION.
Default SettingAs you become familiar with this system, you may prefer to use the system’s original
settings. Follow the steps below to return to the factory default settings.
From the Handset Setup Menu:
1. Press the CALLER ID-VOLUME (6 or 5) button to scroll to the DEFAULT SETTING
sub-menu.