0
Add Records
1. Make sure the phone is OFF (not in TALK mode).
. Press the mute/menu OK/program button to go to the main menu.
. Press CALLER ID-VOLUME (6 or 5) button to scroll to PHONEBOOK.
. Press mute/menu OK/program button to enter PHONEBOOK menu.
5. Use the CALLER ID-VOLUME (6 or 5) button to scroll to ADD RECORDS.
6. Press the mute/menu OK/program button to conrm. The screen displays ENTER
NAME.
7. Use the touch-tone pad to enter a name (up to 15 characters). More than one
letter is stored in each of the number keys. For example, to enter Bill Smith, press
the  key twice for the letter B. Press the  key  times for the letter I. Press the
5 key  times for the letter L. Press the 5 key  times for the second letter L, and
press the 1 key to insert a space between the rst and last name. Press the 7 key
 times for the letter S; press the 6 key once for the letter M; press the  key 
times for the letter I; press the 8 key for the letter T; press the  key twice for the
letter H.
NOTE: If you make a mistake press the delete/intercom/conf button
to backspace and erase the wrong character(s) or number(s).
8. Press the mute/menu OK/program button again to save your selection. The
screen displays ENTER TEL NUMBER.
9. Use the touch-tone pad to enter the telephone number (up to 0 digits, including
pauses), and press the mute/menu OK/program button to conrm. The records
are stored alphabetically in the phonebook.
Inserting a Pause in the Dialing Sequence (of a Stored Number)
Press the #pause button on the handset’s touch-tone pad to insert a delay in dialing
sequence when a pause is needed to wait for a dial tone (for example, after you dial 9
for an outside line, or to wait for a computer access tone.) Each pause counts as one
digit in the dialing sequence.